Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 4.4

Conformity to standards

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 4.4 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) If this Regulation requires that a tool, machine or piece of equipment manufactured before April 15, 1998 must meet a code or standard, the tool, machine or piece of equipment must conform to the edition of the code or standard referred to in this Regulation or the edition of the code or standard published at the time the tool, machine or piece of equipment was manufactured, subject only to the modification or upgrading specified to be necessary in this Regulation or in a directive issued by the Board. (2) When this Regulation requires a person to comply with (a) a publication, code or standard of the Board or another agency, the person may, as an alternative, comply with another publication, code or standard acceptable to the Board, or (b) practices, procedures or rules of the Board or another agency, the person may, as an alternative, comply with another practice, procedure or rule acceptable to the Board.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.