Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 21.2.1

Planning and conducting blasting operations

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 21.2.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) The employer must ensure that all activities of a blasting operation are planned and conducted in a manner consistent with this Regulation and recognized safe blasting practices. (2) Every person who has knowledge and control of any particular activity in a blasting operation must ensure that the activity is planned and conducted in a manner consistent with this Regulation and recognized safe blasting practices. (3) The planning required under this section must (a) include procedures for identifying and addressing potential misfires, (b) include any exposure controls required by Part 5 or 6, (c) identify any work activities or conditions at the workplace where there is a known or reasonably foreseeable risk to persons or property, (d) be completed before work begins on the relevant activity, and (e) be documented at the time of planning. (4) If a change in workplace circumstances, including a change to work activities or conditions at the workplace, poses or creates a known or reasonably foreseeable risk to persons or property that was not previously identified, (a) the planning documented under subsection (3) (e) must be amended to identify and address the risk and provide for the health and safety of persons at or near the workplace, and (b) the amendment must be documented as soon as practicable. (5) The planning documented under subsection (3) (e), and any amendment documented under subsection (4), must be readily available to workers.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.