Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 26.67
Loading logs
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.67 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) If logs are being loaded on a log transporter,
(a) there must be an effective means of communication between the transporter operator and any workers involved in the loading, and
(b) each worker involved in or in the vicinity of the loading must
(i) be in a safe location, and
(ii) without limiting subparagraph (i),
(A) be clear of any moving logs or logs that might move or fall,
(B) not be standing on the cab of a truck or between the cab of the truck and a log being loaded, and
(C) not be resting any part of the worker's body on a log.
(2) A log load on a log transporter must meet the following requirements:
(a) the log load and the log transporter
(i) are stable, without the use of wrappers or tiedowns, during loading and prior to transportation, and
(ii) will remain stable, after the log load is secured in accordance with section 26.68, during transportation;
(b) the log load does not impair the free and full movement of the log transporter;
(c) the working load limits of stakes and stake cables are not exceeded;
(d) to ensure that stakes remain at a safe angle, the bottom layer of logs is laid tight and arranged to minimize slack in the stake cables;
(e) the bottom layer and side rows of the log load extend horizontally beyond at least 2 sets of stakes
(i) at least 30 cm (11.8 in) on compensating-reach-type trailers, or
(ii) at least 15 cm (5.9 in) on other types of log transporters;
(f) a log whose length is shorter than the distance between the stakes is not loaded above the top of the stakes unless the log is in a secure position;
(g) the horizontal centreline of the top log in a side row that is immediately adjacent to a stake is not higher than the top of the stake;
(h) if wrappers or tiedowns are used to secure a log stack of 3 or more layers, the top of the log stack is curved so that the middle part of the curve is higher than the sides of the curve;
(i) the length of each log does not exceed the design limitations of a highway or other surface that the log transporter travels on;
(j) the log load does not include limbs that
(i) pose a risk of injury to a person, or
(ii) impair the safe operation of the log transporter.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.