Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 34.6
Two-rope system
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 34.6 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) In this section, “two-rope system” means a rope access system that includes a working line and a safety, secondary, belay or backup line.
(2) A person performing rope access must use a two-rope system unless one or both of the following apply:
(a) the primary means of support for the person performing rope access is provided by a building, a structure or the ground and not by a rope access system;
(b) in the case of rope access performed
(i) in the course of mountaineering or caving, or
(ii) in a climbing gym,
using a two-rope system may result in a greater hazard than if a single-rope system is used.
(3) In a two-rope system, the working line and the safety, secondary, belay or backup line must
(a) have independent connection points to the system's anchor or anchorage, and
(b) be independently connected to the harness of the person performing rope access.
(4) For the purposes of subsection (3) (b), the working line and the safety, secondary, belay or backup line may be independently connected to a single connection point on the harness of the person performing rope access.
(5) A person must not connect a safety, secondary, belay or backup line to a sternal connection point on the person's full body harness except as permitted by the manufacturer of the harness.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.