Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 12.89
Drilling procedures
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.89 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
A driller must ensure that
(a) the cut is not drilled in the same location as the previous round,
(b) holes are not drilled within 15 cm (6 in) of any part of a bootleg as defined in section 21.1, and
(c) there is no drilling at a face when a hole is loaded or being loaded with explosives except in conformity with the requirements on drilling to refire a misfire, as specified in Part 21 (Blasting Operations).
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.