Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 11.10
Removal from service
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 11.10 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(0.1) If, at any time, a permanent anchor does not meet the requirements of section 11.5 (c), the anchor must not be used until it has been inspected and recertified, by a professional engineer, as meeting the requirements of section 11.5 (c).
(1) After a fall protection system has arrested the fall of a worker, it must
(a) be removed from service, and
(b) not be returned to service until it has been inspected and recertified as safe for use by the manufacturer or its authorized agent, or by a professional engineer.
(2) Subject to subsection (3), subsection (1) (b) does not apply to a personal fall protection system designed and intended for reuse by a performer in the entertainment industry for conducting a planned fall sequence.
(3) The following conditions must be met before a personal fall protection system described in subsection (2) will be exempt from subsection (1) (b):
(a) the system must be designed and used in accordance with a standard acceptable to the Board;
(b) each use of the system must be carried out in accordance with the plan for the conduct of the fall;
(c) the peak arrest forces generated in the system during each use must be at or below both the planned limits and the maximum forces allowed for the system;
(d) after each use of the system no part of the system, including the anchorage, may be reused until a qualified person has inspected it and determined it is in serviceable condition and safe for reuse.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.