Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 8.40
Fit tests
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 8.40 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A respirator which requires an effective seal with the face for proper functioning must not be issued to a worker unless a fit test demonstrates that the facepiece forms an effective seal with the wearer's face.
(2) Fit tests must be performed in accordance with procedures in CSA Standard CAN/CSA-Z94.4-02, Selection, Use, and Care of Respirators.
(2.1) A fit test must be carried out
(a) before initial use of a respirator,
(b) at least once a year,
(c) whenever there is a change in respirator facepiece, including the brand, model, and size, and
(d) whenever changes to the user's physical condition could affect the respirator fit.
(3) Other personal protective equipment that is to be worn at the same time as a respirator and which could interfere with the respirator fit must be worn during a fit test.
(4) Repealed. [B.C. Reg. 20/2006, s. 4 (b).]
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.