Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 26.34
Signalling
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.34 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Only a designated worker may signal for the movement of cable yarding equipment, but any worker may signal to stop cable yarding equipment, and that signal must be obeyed promptly.
(2) The worker designated to signal the yarder operator must
(a) not be otherwise occupied while the equipment is in motion, and
(b) not signal for the movement of the equipment until assured that no workers are endangered within the area for which the designated worker is responsible.
(3) The signals for rigging movement must be clearly discernible to the equipment operator, and to all workers who could be endangered by the movement of the equipment.
(4) A worker who directs or operates equipment, or who could be endangered by the movement of equipment, must be familiar with the meaning of the signals.
(5) The equipment operator must stop the equipment if a signal is not clearly understood.
(6) If voice signals are being used that cannot be heard by workers who could be endangered by the movement of equipment, the equipment operator must not move the equipment until the operator has given a signal by means understandable to all those workers.
(6.1) If voice signals are being used to direct the operation of a grapple yarder, the signals specified in Table 26-8 must be used.
(7) If non-verbal signals such as whistles and hand signals are used to direct the operation of equipment, the signals specified in Tables 26-1 to 26-7 must be used.
(8) When audible signals are being used concurrently to direct the operation of more than one piece of equipment, the signal tones must be differentiated to clearly identify intended movement of each machine.
(9) Signalling devices must be tested at the start of each shift in a way that ensures that equipment will not be moved in response to the test.
(10) Defective signalling devices that might cause a hazard to workers must not be used, and repairs, alterations, or adjustments to signalling devices must be performed by qualified persons.
(11) A radio signalling device used to direct the movement of logging equipment must be designed, maintained and operated in accordance with a standard acceptable to the Board.
(12) Any signalling system using radio frequency transmission must operate on a frequency and at a transmission power assigned and coordinated by a person acceptable to the Board.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.