Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 20.67
Hydraulic equipment
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 20.67 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Only hydraulic pressure hoses with self-seating couplings may be used, and care must be taken to ensure that end connections are not subjected to bending stresses at any time.
(2) Hydraulic equipment must have a bypass valve which is adjusted and maintained to limit the hydraulic pressure so that the tension exerted by the jack on the tendon does not exceed 90% of the minimum specified ultimate strength of the tendon.
(3) Hydraulic hoses must be inspected for flaws, leaks or bubbles after each stressing operation, and any damaged hoses immediately removed from service.
(4) The hydraulic system must be regularly inspected for oil leaks and other damage and necessary corrective action taken.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.