Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 14.13

Inspection, maintenance and repair

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.13 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Each crane and hoist must be inspected and maintained at a frequency and to the extent required to ensure that every component is capable of carrying out its original design function with an adequate margin of safety. (2) A crane or hoist must not be used until any condition that could endanger workers is remedied. (3) Any repair to load bearing components of a crane or hoist must be certified by a professional engineer or the original equipment manufacturer as having returned the component to a condition capable of carrying out its original design function with an adequate margin of safety. (4) Maintenance or repair of a crane or hoist must be done by or under the direct supervision of a qualified person.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.