Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 23.39.2
Emergency escape system 1
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 23.39.2 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A drilling or service derrick must have a specially rigged and securely anchored line as an emergency means of escape that
(a) provides a ready means of escape from the racking board,
(b) consists of a wire rope not less than 13 mm (1/2 in) diameter,
(c) has a length twice the vertical distance between the ground and the point at which it is attached to the derrick,
(d) is effectively anchored and able to withstand a load of 13.3 kN (3 000 lbs), and
(e) is kept free of obstructions.
(2) Equipment must not be placed, and vehicles must not pass, under the last 15 m (50 ft) of the escape line.
(3) A safety buggy of a design acceptable to the Board must be installed and operated on the escape line.
(4) The safety buggy required under subsection (3) must be
(a) kept at the racking board,
(b) provided with an effective brake and means to prevent the trolley from coming off the escape line, and
(c) inspected by a qualified person at least once a week.
(5) The escape line must be tensioned so that a person seated in the safety buggy will touch the ground at a safe distance from the derrick, not less than 6 m (20 ft) from the ground level anchor.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.