Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 15.22

Wire rope clips

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 15.22 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Repealed. [B.C. Reg. 312/2003, App. B, s. 29 (a).] (2) If the manufacturer's specifications for installing and using wire rope clips cannot be determined, the number of clips and the installation torque must be as shown in Table 15-2. (3) The U-bolt part of a wire rope clip must be installed so that it bears on the unloaded end of the wire rope. (4) Malleable cast iron wire rope clips must not be used for hoisting or other critical applications unless approved by the manufacturer for that purpose.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.