Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 12.56

Tool use

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.56 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Only a qualified person may handle or use a powder actuated tool or power loads. (2) The operator must have immediately available when using or servicing a powder actuated tool (a) a copy of the manufacturer's operating instructions for the tool, (b) a copy of the power load and fastener charts for the tool, and (c) any accessories or tools needed for use or field servicing of the tool, including personal protective equipment. (3) Repealed. [B.C. Reg. 312/2003, App. B, s. 17 (b).] (4) A powder actuated tool must not be used in an explosive or flammable atmosphere. (5) A powder actuated tool may only be loaded when it is being prepared for immediate use, and must be unloaded at once if work is interrupted after loading. (6) A powder actuated tool must not be pointed at any person. (7) If a powder actuated tool misfires, the operator must hold the tool firmly against the work surface for at least 5 seconds, then follow the manufacturer's instructions for such occurrences, and until the cartridge has been ejected, keep the tool pointed in a direction which will not cause injury to any person.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.