Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 21.76.1

Drilling for refiring

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 21.76.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

When drilling is necessary to expose a misfire, the blaster must (a) accurately determine the angle of the hole that contains the misfire, (b) direct the angle and depth of the hole being drilled, and (c) ensure that the hole being drilled is at least 60 cm (2 ft) from any part of the misfire.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.