Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 12.173

Pressure relief device — when required

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.173 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) In this section “pressure vessel” has the same meaning as in the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004. (2) A pressure vessel must have a pressure relief device that is set to discharge at 103 kPa (15 psi) or less, if the pressure vessel (a) is connected to a production facility, compressor station or other pressure source, and (b) is not directly open to the atmosphere. (3) Subsection (2) does not apply to a pressure vessel if (a) the pressure vessel is subject to the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, or (b) the manufacturer of the pressure vessel or a professional engineer indicates in writing that (i) the pressure vessel will not operate in accordance with its engineered design if the vessel has a pressure relief device that is set to discharge at 103 kPa (15 psi), and (ii) the pressure vessel can be operated safely without a pressure relief device or with a pressure relief device that is set to discharge at greater than 103 kPa (15 psi). (4) A pressurized system, including any lines running from the output side of a pressure relief device that may be subject to accidental restriction, must be protected by a pressure relief device.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.