Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 15.56

Rejection criteria

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 15.56 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

A metal mesh sling must be removed from service if any of the following damage is visible: (a) a broken weld or a broken brazed joint along the sling edge; (b) a broken wire in any part of the mesh; (c) reduction in wire diameter of 25% due to abrasion or 15% due to corrosion; (d) lack of flexibility due to distortion of the mesh; (e) distortion of the choker fitting so that the depth of the slot is increased by more than 10%; (f) distortion of either end fitting so that the width of the eye opening is decreased by more than 10%; (g) a 15% reduction of the original cross-sectional area of metal at any point around the hook opening or end fitting; (h) visible distortion of either end fitting; (i) a cracked end fitting.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.