Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 26.46
Skyline anchors
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.46 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A skyline must be anchored to
(a) a stump or to a suitable manufactured anchor,
(b) the base of a standing tree if the tree is tied back to a secondary anchor, or
(c) a suitable piece of mobile equipment.
(2) A skyline must be secured to an anchor by
(a) a choker using a large sleeve-type knockout pin shackle or an approved safety pin-type shackle over the skyline with the pin through the eye,
(b) a strap acceptable to the Board, with both eyes hung in a shackle and the knockout pin or safety pin through the eye of the skyline, or
(c) a wire rope clip system meeting the requirements of Part 15.
(3) If anchor stumps in standing timber are used for slackline or other skyline operations, the skyline must be prevented from striking trees in the area, or the trees must be felled.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.