Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 22.106
General requirement
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 22.106 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) The employer must ensure that
(a) where a timber work platform is used, the main platform bearers are securely pinned to prevent them from dislodging,
(b) ladderways and travelways used for foot traffic are maintained in good repair and clean condition,
(c) a raise in excess of 50 measured from horizontal and 15 m (50 ft) in length has separate compartments for the passage of workers and blasted material during the driving operation and, where timber is used, that it is installed to within 5 m (16 ft) of the face, and
(d) if an accessway and a skipway occupy the same compartment in a raise, the accessway is not used by workers when the skip is in motion, and a guard is installed between the accessway and skipway to prevent workers from falling into the skipway.
(2) The requirements of subsection (1) do not apply to a raise using mechanical raise equipment.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.