Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 16.38

Rollover or tipover and fire

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.38 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) This section applies to the following mobile equipment: (a) a feller buncher; (b) a timber harvester; (c) a timber processor with a significant risk of rollover or tipover when operating on a sloped forest worksite other than a road or a landing. (2) In addition to meeting the requirements of section 16.24, the mobile equipment referred to in subsection (1) must be equipped with the following: (a) attached to the inside of the cab, a powered cutting tool able to effectively cut through steel guard bars and polycarbonate windows in a timely manner to provide an emergency means of escape; (b) attached to the mobile equipment, in a position that is outside of the cab, a fire extinguisher in good working order with a UL Rating of at least 4-A:60-B:C; (c) if the mobile equipment is manufactured more than 2 years after September 1, 2021, an effective engine fire suppression system that will discharge when needed in the event of a rollover or tipover.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.