Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 14.96

Certifications and instructions

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.96 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Before a construction material hoist is put into use, a professional engineer must certify that (a) the hoist is safe for use, and (b) the installation of the hoist complies with (i) the design criteria for that installation, (ii) the hoist manufacturer's specifications, (iii) the requirements of CSA Standard CAN/CSA-Z256-M87, Safety Code for Material Hoists, and (iv) the requirements of this Regulation. (2) If, after certification under subsection (1), a modification is made to the structure, mechanical components or control system of a construction material hoist or it is changed through the addition or removal of a support section of the hoist, the hoist must not be used until it is recertified as safe for use by a professional engineer. (3) Subsections (1) and (2) do not apply to a light duty portable material hoist installed and operated in accordance with the hoist manufacturer's instructions. (4) A copy of the certifications required in subsections (1) and (2) or the manufacturer's instructions referred to in subsection (3) must be available at the workplace where the hoist is installed.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.