Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 20.98

Rappelling and work positioning systems

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 20.98 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) A worker on a rock face or other steep slope must be protected from falling by a work positioning or rappelling system, or by a fall arrest system as required by Part 11 (Fall Protection). (2) A single rope work positioning system may be used by a worker to rappel to and remain in work locations on a rock face or other steep slope if tension is maintained in the rappel rope at all times so that the worker is not exposed to a free fall. (3) If the work practice could result in a slack line in the rappel or work positioning system and a fall could occur, a personal fall arrest system, independently anchored, meeting the requirements of Part 11 (Fall Protection) must be used. (4) Rappelling techniques must provide for automatic stopping by means of a mechanical fall arrestor, Prusik sling or other device acceptable to the Board. (5) A rappelling or fall protection system must be used in a manner that minimizes the swing-fall hazard.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.