Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 16.8

Rider restrictions

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.8 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) In this section: “barricade” means a barricade referred to as a type 1, type 1A, type 2 or type 3 barricade in the Traffic Management Manual; “buffer vehicle” means a vehicle referred to as a buffer vehicle in the Traffic Management Manual; “drum” means a traffic control device referred to as a drum in the Traffic Management Manual; “flashing arrow board” means a traffic sign referred to as a flashing arrow board in the Traffic Management Manual; “multilane roadway” means a roadway that has 2 or more lanes in which traffic flows in the same direction, including climbing and passing lanes, whether or not there are also lanes in which traffic flows in the opposite direction; “traffic cone” means a traffic cone or tubular marker referred to in the Traffic Management Manual; “Traffic Management Manual” means the latest edition of the Traffic Management Manual for Work on Roadways issued by the Ministry of Transportation and Infrastructure. (2) An operator of mobile equipment is the only person authorized to ride on mobile equipment unless (a) the mobile equipment is a worker transportation vehicle, as defined in section 17.01, that meets the requirements of Part 17, or (b) subsections (3) to (7) apply. (3) A person other than the operator may only ride on a ROPS-equipped prime mover for the purpose of training or maintenance and, for that purpose, the prime mover (a) must not be operated in a rollover hazard area, and (b) must not be engaged in an operation that could (i) cause the mobile equipment to become unstable, or (ii) cause the person to fall or be ejected, pinched or dragged. (4) Subsection (3) does not apply if the person, other than the operator, who is riding a ROPS-equipped snowcat or a ROPS-equipped UTV is sitting on a seat that meets the requirements of section 16.20. (5) A person other than the operator of mobile equipment may only ride on a prime mover without a ROPS as part of a job task and (a) must sit on a seat that meets the requirements of section 16.20, or (b) must be protected by other safe facilities provided by the manufacturer of the mobile equipment or designed by a professional engineer, that include (i) a footboard or platform upon which the person stands or sits, located to protect the person from contact with roadside objects or vehicles, (ii) hand-holds, and (iii) a safety belt, harness, guardrail or other effective means of restraint, except where the person is a swamper riding on the back of a garbage truck during short pickup runs not exceeding a speed of 20 km/h (12 mph). (6) Rear-mounted platforms or footboards must not be occupied when the mobile equipment is backing up. (7) A person who is occupying a rear-mounted platform or footboard on non-ROPS equipped mobile equipment as part of a method of retrieving traffic cones from a closed lane of a multilane roadway is not prohibited under subsection (6) or section 18.3 from occupying the platform or footboard when the mobile equipment is backing up if all of the following conditions are met: (a) the mobile equipment is backing up in the closed lane; (b) the employer has (i) identified the hazards to the persons at the workplace, and (ii) taken measures (A) to eliminate the hazards, or (B) if it is not practicable to eliminate an identified hazard, to minimize the risk to persons from the hazard to the lowest level practicable; (c) a written safe work procedure has been established by the employer and is being followed, which procedure (i) relates to that method of retrieving traffic cones, and (ii) includes a description of the measures referred to in paragraph (b) (ii); (d) the mobile equipment is not exceeding a speed of 15 km/h (9 mph); (e) the mobile equipment has both of the following operating devices: (i) two or more 360° flashing yellow lights; (ii) a flashing arrow board pointing toward the open lane adjacent to the closed lane; (f) the mobile equipment has an audio warning device that (i) makes a distinct sound that is audible, above the ambient noise level in the workplace, to both the operator and the person, and (ii) operates automatically and continuously while the mobile equipment is backing up; (g) there is an effective 2-way voice communication system between the operator and the person on the platform; (h) one of the following requirements is met: (i) behind the rear of the mobile equipment, barricades are placed across the closed lane or drums are placed in the centre of the closed lane, in accordance with the following: (A) the barricade or drum closest to the mobile equipment is continuously located not more than 250 m from the rear of the mobile equipment; (B) the barricades or drums are located along the length and to the end of the closed lane at intervals of not greater than 250 m; (ii) directly behind and at a safe distance from the rear of the mobile equipment, in the closed lane, there is a buffer vehicle that meets the following requirements: (A) the buffer vehicle is continuously located not more than 100 m from the rear of the mobile equipment; (B) the buffer vehicle has 2 or more 360° flashing yellow lights and the lights are operating; (C) the buffer vehicle has a flashing arrow board pointing toward the open lane adjacent to the closed lane and the flashing arrow board is operating; (D) there is an effective 3-way voice communication system among the operator of the buffer vehicle, the operator of the mobile equipment and the person on the platform; (i) the maximum load capacity established for the platform by the manufacturer or by the professional engineer who designed the platform is clearly marked on the platform and is not being exceeded. (8) Unless otherwise provided in subsection (7), the mobile equipment, arrangements and procedures referred to in that subsection must meet all applicable requirements in respect of the equipment, arrangements and procedures that are set out for traffic control under Part 18.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.