Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 14.74

Tower crane support

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.74 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) The foundation for support of a tower crane must be certified by a professional engineer. (2) The design of shoring and bracing to support a tower crane must be certified by a professional engineer, and the shoring and bracing must be constructed as specified by the design. (3) If a tower crane is supported partially or fully by, or connected to, a building or structure, the connections to and any bracing or shoring of the building or structure necessary to support the tower crane must be certified by a professional engineer. (4) The bearing capacity of the supporting surface for a tower crane must be determined by a professional engineer. (5) The loads from a tower crane must be distributed onto its supporting surface to prevent the bearing capacity of the supporting surface being exceeded.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.