Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 12.90
Rod handling
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.90 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A drill operator working without a helper must not manually add or remove drill steel or a drill bit, or service drilling equipment, while the drill is rotating under power.
(2) A worker assisting the drill operator with drill bit or drill steel handling must remain clear of rotating parts of the drill system.
(3) Except as provided in subsection (4), a boom-mounted percussion drill being used with multiple lengths of coupled drill steel must have a rod changer or other effective device installed and used to add or remove drill steel.
(4) If it is not practicable to fit a rod changer to a boom-mounted percussion drill, adequate written safe work procedures for adding and removing drill steel must be available, and the drill must be operated in accordance with those procedures.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.