Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 12.59
Removing guards
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.59 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) If the use of a guard on woodworking machinery is clearly impracticable for a specific operation, the guard may be removed, but an appropriate pushstick, jig, feather board or similar device must be used to prevent the operator encroaching into the cutting area, and upon completion of the operation the guard must be replaced.
(2) A guard may otherwise only be removed if the guard itself creates a hazard, or if its removal is necessary for maintenance.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.