Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 19.22
Grounding and blocking
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 19.22 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) After a safety protection guarantee is in effect, the equipment to be worked on must be tested to verify isolation before grounding and blocking begins.
(2) After testing to verify isolation, the person at the worksite responsible for each crew must verify that required grounding and blocking devices are in place before work begins.
(3) Grounding and blocking of any equipment that may be hazardous to workers must be carried out as close as practicable to the worksite.
(4) If grounding and blocking is not safe or practicable, written safe work procedures acceptable to the Board must be followed.
(5) Grounding and blocking devices may be removed for the purpose of conducting tests.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.