Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 8.24

High visibility apparel

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 8.24 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) A worker who is exposed to vehicles or mobile equipment travelling at speeds in excess of 30 km/h must wear high visibility apparel that meets the requirements for Class 2 or Class 3 apparel in CSA Standard Z96-15, High-Visibility Safety Apparel. (2) A worker who is exposed to vehicles or mobile equipment travelling at speeds equal to or less than 30 km/h must wear high visibility apparel that meets the requirements for Class 1, Class 2 or Class 3 apparel in CSA Standard Z96-15, High-Visibility Safety Apparel. (3) Subsections (1) and (2) do not apply to the following: (a) a firefighter who is wearing a protective coat that meets the requirements of the 2007, 2013 or 2018 edition of NFPA 1971, Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting; (b) the following persons who are wearing high visibility apparel that meets the requirements for Class 2 apparel in CSA Standard Z96-15, High-Visibility Safety Apparel as modified in accordance with subsection (4): (i) a person who is employed by British Columbia Emergency Health Services as an emergency medical assistant or in any other capacity; (ii) a municipal constable as defined in the Police Act; (iii) a person who is employed in the Commercial Vehicle Safety and Enforcement branch of the Ministry of Transportation and Infrastructure; (c) a traffic control person referred to in section 18.9 of this regulation. (4) For the purposes of subsection (3) (b), the requirements for Class 2 apparel are modified as follows: (a) retroreflective or combined-performance stripes and bands must have (i) a minimum width of 25 mm, (ii) an entirely retroflective area with a minimum width of 25 mm, (iii) a minimum coefficient of retroreflection of 240 cd/(lx•m2) measured at an observation angle of 0.2 degrees and an entrance angle of −4 degrees in accordance with CSA Standard Z96-15, High-Visibility Safety Apparel, and (iv) a minimum area of 0.05 m2 on the front of the apparel and 0.05 m2 on the back of the apparel; (b) retroreflective or combined-performance stripes and bands do not have to form an "X" on the back of the apparel; (c) the requirements relating to identification patches and lettering do not apply; (d) background material, excluding identification patches, lettering and retroreflective or combined-performance stripes and bands, must have a minimum area of 0.13 m2 on the front of the apparel and 0.13 m2 on the back of the apparel.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.