Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 26.25
Dangerous trees and logs
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.25 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Falling or bucking must not be started if
(a) a tree or log is in a condition that, if felled or bucked in that condition, the tree or log would pose a reasonably foreseeable risk to a worker, or
(b) it appears that the tree cannot be completely felled or the bucking cut cannot be completed, as the case may be.
(2) If for any reason a partially cut tree cannot be completely felled and must be bypassed or left unattended, then the following apply:
(a) the tree must be clearly marked;
(b) work, other than that necessary to complete the falling of the tree, must stop in the hazard area until the tree is felled;
(c) any worker who could enter the hazard area must be alerted to the hazard;
(d) the supervisor for that falling activity must be notified.
(3) The supervisor referred to in subsection (2) (d) must ensure that
(a) all workers at risk are notified, and
(b) the tree is safely felled before other work is undertaken in the hazard area.
(4) If a bucking cut cannot be completed and the partially bucked log must be bypassed or left unattended, then the following apply:
(a) if possible, a distinct cross must immediately be cut or marked on the top of each end of the log;
(b) the supervisor for the bucking activity must be notified at the end of the work day;
(c) the supervisor for the bucking activity must notify all workers at risk.
(5) Subsections (2) to (4) do not apply if the incomplete falling or bucking is part of a planned process in which safe work practices acceptable to the Board are implemented.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.