Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 23.84
Welding precautions
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 23.84 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) After a vessel or tank has been cleaned, and before further work is performed,
(a) the vessel or tank must be ventilated and tested for toxic and flammable substances and oxygen deficiency, and
(b) repeat tests must be made while work is in progress, as required by Part 9 [Confined Spaces].
(2) If necessary to ensure the safety of workers, steam or an inert gas must be used to purge flammable substances from tankers, tanks, vessels or piping prior to any cutting or welding operations.
(3) Services must be provided through the top accessway of a tank or vessel or, if this is not practicable, the services must be protected.
(4) Equipment or fire extinguishers must not cause a hazard to workers in the tank or vessel.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.