Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 6.1

Definitions

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 6.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

In this section and sections 6.2 to 6.32: “asbestos certificate” means a certificate, issued by the Board or by a person acceptable to the Board, for the purposes of carrying out asbestos abatement work; “asbestos-containing material” means the following: (a) a manufactured article or other material, other than vermiculite insulation, that would be determined to contain at least 0.5% asbestos if tested in accordance with one of the following methods: (i) Asbestos, Chrysotile by XRD, Method 9000 (Issue 2, dated August 15, 1994) in the NIOSH Manual of Analytical Methods, published by the United States National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention; (ii) Asbestos (bulk) by PLM, Method 9002 (Issue 2, dated August 15, 1994) in the NIOSH Manual of Analytical Methods, published by the United States National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention; (iii) Test Method for the Determination of Asbestos in Bulk Building Materials (EPA/600/R-93/116, dated July 1993) published by the United States Environmental Protection Agency; (b) vermiculite insulation that would be determined to contain any asbestos if tested in accordance with the Research Method for Sampling and Analysis of Fibrous Amphibole in Vermiculite Attic Insulation (EPA/600/R-04/004, dated January 2004) published by the United States Environmental Protection Agency; “clean room” means a room in a high risk decontamination facility which is used by workers to change from street clothes into protective work clothing and equipment prior to entering the designated work area; “clearance air sampling” means sampling to determine if the air inside a containment of a high risk work activity is sufficiently free of asbestos fibre to permit the dismantling of the containment; “containment” means an isolation system designed to effectively contain asbestos fibre within a designated work area where asbestos-containing material is handled, removed, encapsulated or enclosed, and includes a glove bag; “decontamination facility” means a series of rooms constructed so as to allow a person to enter and leave a containment without spreading asbestos fibre or waste material beyond the designated work area; “designated work area” means an area for work with asbestos-containing material which is restricted to access by authorized persons by warning signs and by barricades, enclosures or other means of isolation, with due regard for the level of risk; “encapsulation” means treatment of an asbestos-containing material or surface with a sealant which penetrates the material and binds the fibres together; “enclosure” means isolation of asbestos-containing material from adjacent occupied areas in a building by physical barriers such as gyproc, plywood, or metal sheeting, to prevent the release of airborne asbestos fibres into these areas; “friable asbestos-containing material” means asbestos-containing material that is crumbled or powdered or can be crumbled or powdered by hand pressure; “high risk work activity” means a work activity that involves working with or in proximity to asbestos-containing material if a high level of control is necessary in respect of that activity to prevent exposure of a worker to airborne asbestos fibre; “low risk work activity” means a work activity that involves working with or in proximity to asbestos-containing material if, at the time the work activity is being carried out, both of the following apply: (a) the asbestos-containing material is not being (i) cut, sanded, drilled, broken, ground down or otherwise fragmented, or (ii) disturbed such that the asbestos-containing material may release airborne asbestos fibre; (b) it is not necessary to use personal protective equipment or engineering controls in respect of that activity to prevent exposure of a worker to airborne asbestos fibre; “moderate risk work activity” means a work activity, other than a high risk work activity, that involves working with or in proximity to asbestos-containing material if, at the time the work activity is being carried out, one or both of the following apply: (a) the asbestos-containing material is being (i) cut, sanded, drilled, broken, ground down or otherwise fragmented, or (ii) disturbed such that the asbestos-containing material may release airborne asbestos fibre; (b) it is necessary to use personal protective equipment or engineering controls, or both, in respect of that activity to prevent exposure of a worker to airborne asbestos fibre; “qualified person” means a person who (a) has knowledge of the management and control of asbestos hazards through education and training, and (b) has experience in the management and control of asbestos hazards.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.