Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 22.110
Raise climbers
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 22.110 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Before a raise climber is installed, the Board must be notified and, if required, the employer must submit the design drawings and technical details of the installation, including construction materials, rated load capacities, dimensions, operating controls and safety features.
(2) The materials and procedures used in the construction of a raise climber must conform to the requirements of appropriate standards of the CSA or ASTM.
(3) A raise climber must not be put into service unless a certificate is available from the manufacturer, or a professional engineer, attesting that all critical load bearing components of the complete assembly and its accessories have been inspected and non-destructively tested by approved methods.
(4) At least once a year after it has been put into service, or when ordered by the Board, any part of a raise climber installation which if it failed could endanger workers must be non-destructively tested by persons certified in accordance with CGSB Standard CAN/CGSB-48.9712-95, Qualification and Certification of Non-destructive Testing Personnel, and a copy of the test report must be made available on site for inspection by an officer.
(5) A raise climber that has previously been in use in any place beyond the control of the present employer must not be re-installed until the inspections and tests required by subsection (3) have been carried out.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.