Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 27.19

Band saw guarding

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.19 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) A band saw and its band wheels must be enclosed or otherwise effectively guarded except in the cutting area to prevent worker contact and to restrain the saw blade in the event of blade failure. (2) If metal enclosures are used with shake band saw wheels, the top door panel must be fitted with an inside wooden liner. (3) For a hand-fed shake band saw, the distance between the top of the table rollers and the top guide must not exceed 36 cm (14 in).
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.