Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 16.21.1

When minimum 3-point seat belts required

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.21.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) In this section, “haul truck” means a haul truck designed for off-highway use, including a rigid dump truck, articulated dump truck or rock truck. (2) This section applies to the following ROPS-equipped prime movers manufactured on or after March 31, 2027, other than a worker transportation vehicle as defined in section 17.01: (a) a haul truck; (b) a prime mover, other than a road grader, that is used in or that is designed or adapted for use in a forestry operation as defined in section 26.1; (c) a prime mover that is used for an activity related to fighting forest fires, including fire prevention, fire suppression, deactivating roads and fire guards and site rehabilitation; (d) a prime mover that is used for land clearing on a slope which exceeds 35%. (3) The seat of a ROPS-equipped prime mover to which this section applies, other than the seat occupied by a person authorized to ride for a purpose set out in section 16.8 (3), must have, at minimum, 3-point seat belts that meet the requirements of one of the following standards or the earlier version of the standard that applied on the date of manufacture of the prime mover: (a) SAE J2292 (2016), Combination Pelvic and Upper Torso Operator and Occupant Restraint Systems for Off-Road Work Machines; (b) Economic Commission for Europe of the United Nations (UN/ECE) ECE Regulation No. 16, Safety-belts.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.