Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 26.13.4

Saw chain shot

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.13.4 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) In this section, “saw chain shot” means one or more parts of a saw chain travelling at a high speed as a result of the saw chain breaking. (2) This section applies to mobile equipment that is (a) used in mechanical falling activities or log processing, (b) equipped with a saw that cuts using a saw chain, and (c) manufactured on or after May 1, 2019. (3) Mobile equipment referred to in subsection (2) must meet one of the following requirements: (a) the mobile equipment must have protective guards or other devices that prevent the mobile equipment's cab windows from being directly struck by saw chain shot from the mobile equipment's saw chain; (b) each cab window that could be directly struck by saw chain shot from the mobile equipment's saw chain must (i) be made of one or more sheets of polycarbonate that have a total thickness of at least 32 mm (1.25 in), or (ii) meet or exceed the requirements of the level 1 outdoor use ballistics tests of ANSI/UL 752, Standard for Bullet-Resisting Equipment, 11th edition (with revisions up to and including December 11, 2015). (4) For the purposes of subsection (3), saw chain shot that ricochets off an object and then strikes a cab window is not considered to have directly struck the cab window.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.