Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 27.23
Chop, trim and swing cutoff saws
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.23 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Each swing cutoff saw must have
(a) a device to automatically return the saw to the back of the table,
(b) a limit chain, or similar device to prevent the saw from swinging beyond the front of the table and past a position where the gullets of the lowest teeth rise above the top of the table, and
(c) a latch or similar device to prevent saw rebound.
(2) A swing cutoff saw operator must be positioned so that no part of the operator's body is in line with the saw.
(3) Each chop, trim and swing cutoff saw must
(a) be effectively guarded,
(b) be guarded by location, or
(c) have other effective means that prevent the operator's hands being placed in the cutting area when the saw is activated.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.