Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 6.115

Asphalt mixing plants

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 6.115 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

Asphalt mixing plants must be equipped with the following dust controls: (a) a dust-tight seal must be installed at the dryer discharge to the hot stone elevator; (b) the screen enclosure must have a mechanical exhaust system that maintains a negative pressure within the screen enclosure and the elevator feed system; (c) the mixing chamber must have a mechanical exhaust system that maintains a negative pressure on the bin discharge to the mixer or elevator feed system; (d) on continuous-mix plants the conveyor feeding the mixing chamber must be enclosed and connected to the mechanical exhaust system; (e) the screen overflow chutes and hoppers handling screen overflow must be enclosed, and the waste fines conveyor system must be enclosed at all material transfer and discharge points; (f) the discharge of overflow or waste fines material must be to an enclosed container, which must be emptied in a manner that prevents contamination of the work area; (g) material transfer points between sections of the asphalt mixing plant must be fitted with effective dust seals; (h) conveyor and elevator cover seals must be dust-tight; (i) on batch-mix plants, dust-tight seals must be installed on manual draw chute levers and on the weigh-hopper and bin; (j) a suitable dust collector must be installed on the mechanical exhaust system, with the discharge from the dust collector located so as to prevent the recirculation of contaminated air to areas occupied by workers.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.