Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 12.28
Emergency stopping devices
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.28 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A conveyor must have an emergency stopping system unless worker access to the conveyor is prevented by guarding.
(2) The conveyor emergency stopping system must be designed and installed so that the system will activate as a worker falls onto the conveyor, or if a fallen worker on the conveyor moves an arm or leg off to one side of the conveyor.
(3) If a conveyor emergency stopping system uses a pull wire, the system must activate by a pull of the wire in any direction, or by a slack cable condition.
(4) The conveyor emergency stopping system must be designed and installed so that after an emergency stop, manual resetting is required before the conveyor can be restarted.
(5) A conveyor must not be restarted after an emergency stop until inspection has determined it can be operated safely.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.