Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 6.112.2
Elimination or control of exposure
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 6.112.2 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) An employer must, to the extent practicable, avoid the use of products or materials containing crystalline silica by replacing them with substances or processes that, under normal conditions of use, eliminate the risk of worker exposure to RCS dust.
(2) If it is not practicable to eliminate the risk of worker exposure to RCS dust, the employer must control the risk below the applicable exposure limit under section 5.48 by applying control measures that
(a) are appropriate to the work activity,
(b) are consistent with the risk assessment and with sections 5.55 and 5.57, and
(c) include, in order of priority,
(i) the design and use of engineering controls, including appropriate dust reduction systems, containment of silica processes, and the provision and use of suitable work equipment and materials,
(ii) the control of RCS dust exposure through administrative controls, including work practice controls, and
(iii) if the control measures set out in paragraphs (i) and (ii) are not adequate to control exposure, the provision and use of suitable personal protective equipment in addition to those control measures.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.