Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 13.11
Engineering required
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 13.11 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) The following must be constructed, installed and used in accordance with the instructions of a professional engineer:
(a) bracing for a scaffold, if the scaffold is enclosed by a tarpaulin or any other cover;
(b) a scaffold exceeding 38 m (125 ft) in height;
(c) a scaffold exceeding 25 m (80 ft) in height, if stairways are included as part of the scaffold;
(d) a scaffold used to support a temporary floor;
(e) a scaffold used to support a crane or hoist, other than a scaffold used to support a manually powered crane or manually powered hoist;
(f) a scaffold suspended or cantilevered from a structure;
(g) a scaffold system supported by a catenary line;
(h) a needle beam scaffold;
(i) an outrigger scaffold.
(2) Permanent powered platforms must be constructed, installed and used in accordance with the instructions of a professional engineer.
(3) If a boat is used as a work platform in a pile driving operation, a professional engineer must certify the integrity of the boat for this purpose.
(4) A signed copy of the engineer's instructions or certification referred to in subsections (1) to (3) must be available at the workplace during installation, disassembly and use of the system.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.