Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 24.55

Lifting gear

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 24.55 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Each SCC and LOS must be used in association with lifting gear that (a) enables the SCC or LOS to be lowered to the depth at which the diving operation is to be carried out, without excessive lateral, vertical, or rotational movement taking place, (b) is provided with, in addition to the primary lifting cable, a tag rope so designed that in the event of the primary cable breaking during an air water interface transfer, the tag rope will permit the SCC or LOS to descend only to a calm area immediately below the turbulent wave zone, and (c) is provided with a secondary means of being returned to the surface in the event of failure of the main lifting gear. (2) If use of the secondary means in subsection (1) (c) involves shedding weights, the controls for shedding weights must be operable from within the SCC or LOS and must incorporate a means to prevent the weights from being shed inadvertently.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.