Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 14.2

Standards

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.2 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Except as otherwise required by this Regulation, a crane or hoist must be designed, constructed, assembled, erected, climbed, repositioned, adjusted, disassembled, dismantled, inspected, maintained and operated as specified by the manufacturer or a professional engineer, and to meet the requirements of the applicable standard listed in subsections (2) to (15). (2) A bridge, jib, monorail, gantry or overhead travelling crane must meet the design requirements for electrical components and functions of CSA Standard C22.1-94, Canadian Electrical Code, Part 1, Section 40 and CSA Standard C22.2 No. 33-M1984 (Reaffirmed 1992), Construction and Test of Electric Cranes and Hoists. (3) A bridge, jib, monorail, gantry or overhead travelling crane must meet the design requirements of (a) ANSI Standard MH27.1-2003, Specifications for Patented Track Underhung Cranes and Monorail Systems, (b) Crane Manufacturers Association of America (CMAA) Specifications for Top Running Bridge & Gantry Type Multiple Girder Electric Overhead Traveling Cranes — No. 70 (2004), or (c) Crane Manufacturers Association of America (CMAA) Specifications for Top Running and Under Running Single Girder Electric Overhead Cranes Utilizing Under Running Trolley Hoist — No. 74 (2004). (4) A bridge, jib, monorail, gantry or overhead travelling crane must meet the safety requirements of (a) CSA Standard B167-96, Safety Standard for Maintenance and Inspection of Overhead Cranes, Gantry Cranes, Monorails, Hoists, and Trolleys, (b) ANSI Standard ANSI/ASME B30.2-2005, Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist), (c) ANSI Standard ANSI/ASME B30.11-2004, Monorails and Underhung Cranes, (d) ANSI Standard ANSI/ASME B30.16-2003, Overhead Hoists (Underhung), or (e) ANSI Standard ANSI/ASME B30.17-2003, Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist). (5) A mobile crane, telescoping or articulating boom truck or sign truck must meet the requirements of (a) CSA Standard Z150-1998, Safety Code for Mobile Cranes, (b) ANSI Standard ANSI/ASME B30.5-2004, Mobile and Locomotive Cranes, or (c) ANSI Standard ANSI/ASME B30.22-2005, Articulating Boom Cranes. (6) A tower, hammerhead crane or self erecting tower crane must meet the requirements of CSA Standard Z248-2004, Code for Tower Cranes. (7) A portal, tower or pillar crane must meet the requirements of ANSI Standard ASME B30.4-2003, Portal, Tower, and Pedestal Cranes. (8) A construction material hoist, other than a light duty portable material hoist, must meet the requirements of CSA Standard CAN/CSA-Z256-M87, Safety Code for Material Hoists. (9) A chimney hoist must meet the requirements of WorkSafeBC Standard 14.116 — Chimney Hoists, set out in Schedule 14-A. (10) A base mounted drum hoist must meet the requirements of ANSI Standard ASME B30.7-2001, Base Mounted Drum Hoists. (11) A guy, stiffleg, basket, breast, gin pole, Chicago boom, shearleg or A-frame derrick must meet the requirements of ANSI Standard ASME B30.6-2003, Derricks. (12) A side boom tractor used for pipe laying or similar operations must meet the requirements of ANSI Standard ASME B30.14-2004, Side Boom Tractors. (13) A manually lever operated hoist must meet the requirements of ANSI Standard B30.21-2005, Manually Lever Operated Hoists. (14) A patient lift must meet the requirements of CSA Standard CAN/CSA Z10535-03, Hoists for the Transfer of Disabled Persons-Requirements and Test Methods. (15) A crane or hoist of a type not covered by the standards specified in subsections (2) to (14) must meet good engineering practice and be able to safely perform its function.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.