Regulation of Canada
Multi-Sector Air Pollutants Regulations
Statute Watch
Get an alert when a bill in Parliament would change this regulation, and every time it moves.
- Citation
- SOR/2016-151
- Current to
- January 19, 2026
- Last amended
- January 1, 2026
- Made under
- Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33
- Official text
- Justice Laws Website ↗
Bills in Parliament that would change it 0
No bill we hold would amend or repeal it.
Contents 150 entries
Overview
1 Parts 1, 2 and 3Interpretation
2 DefinitionsResponsibility
3 Who must complyBoilers and Heaters
Interpretation
4 DefinitionsApplication
5 Rated capacity at least 10.5 GJ/hMain Requirements
6 Modern boilers 7 Modern heaters 8 Determination of type of gaseous fossil fuel 9 Transitional boilers and heaters 10 Redesigned boilers and heaters — NOx emission intensity 11 Class 80 and class 70 12 Pre-existing boilers and heaters — classification 13 Major modifications — class 80 and class 70 14 Exception — impossibilityQuantification
Elements of Requirements
15 Input energy from gaseous fossil fuelType of Gas
16 Percentage of methane 17 Fixed HHV of commercial grade natural gasThermal Efficiency
18 Modern boiler 19 Determination of Ldfg 20 Determination of Lw 21 Commercial grade natural gas — determined or fixed 22 Required HHV methods 23 Constituents of fuel 24 Difference of temperature — preheated airDetermination of NOx Emission Intensity
Stack Test or CEMS Test
25 Conditions 26 Identification — exception to paragraph 25(b) 26.1 Common stackStack Tests
27 Three test runs 28 Concentrations of NOx and O2 29 Determination of NOx emission intensity 30 NOx emission intensity — average 31 NOx emission intensity — deemed hoursContinuous Emission Monitoring System
32 Rolling hourly averageTesting
33 Initial test 34 Classification NOx emission intensity — on registration 35 [Repealed, SOR/2016-151, s. 128] 36 Redetermination after election under subparagraph 34(1)(b)(vi) 36.1 Redetermination — record of information 37 Redetermination after triggering event — class 40 38 Compliance tests — stack or CEMS testOperation, Maintenance and Design
39 SpecificationsReporting
40 Initial report 41 42 Compliance report 43 Change reportRecording of Information
44 Record-makingStationary Spark-ignition Engines
Interpretation
45 DefinitionsApplication
46 Pre-existing and modern engines 47 Non-application — low revenue and power 48 Non-application — new owners 49 Synthetic gas and still gasGeneral
50 Regular-use engines 51 Low-use engines — election 52 Designation as rich-burn engine 53 Applicable units — NOx emission intensity limitModern Engines
54 Regular-use — limit 55 Low-use — limitPre-existing Engines
Groups
56 EstablishmentNOx Emission Intensity Limits
57 Engines not belonging to a group 58 Engines belonging to a group 59 [Repealed, SOR/2016-151, s. 136]Yearly Average NOx Emission Intensity Limits — on Election
60 Certain pre-existing engines 61 Election 62 Revocation — on notice 63 Revocation — after conviction 64 Replacement units 65 Designation of subgroups 66 Assignment of default NOx emission value 67 Assignment of non-default NOx emission value 68 NOx emission intensity limit — non-default NOx emission valuesDetermination of NOx Emission Intensity
Performance Tests
69 NOx emission intensity limits 70 Three test runs 71 Sampling ports 72 Concentration of NOx 73 ppmvd15% 74 g/kWh 75 NOx emission intensity — average 76 NOx emission intensity — deemed days 77 Performance tests 78 Subsequent performance testEmissions Checks
79 When emissions check required for certain engines 80 Using electrochemical analyzer 81 Calibration error checks and interference responses 82 Analyzer — operation and maintenance 83 Sequence of calibration error checks 84 Reading for CO and NO interference responses 85 Invalid emissions check — calibration and interference 86 Emissions check — sampling ports 87 Operating conditions for emissions checks 88 Emissions check — sampling procedure 89 Concentration of O2, CO, NO and NO2 — average 90 Invalid emissions check — temperaturePerformance Tests and Emissions Checks
91 Periods when not conducted 92 Extended period for new owners 93 Extended period — last dayEngine Management
94 Nameplate 95 Operation and maintenance 96 Air-fuel ratioRegistry, Reporting and Recording of Information
97 Engine registry 98 Change of information — engine registry 99 Compliance reports 100 Record-makingCement
101 Definitions 102 Application — grey cement 103 Obligation — over two consecutive years 104 Emission limit — NOx 105 Emission limit — SO2 106 Quantity of NOx and SO2 — CEMS 107 Quantity of clinker 108 Compliance reportGeneral
Continuous Emission Monitoring Systems
109 CEMS Reference Method — compliance 110 Annual auditMeasuring Devices
111 Installation, operation, maintenance and calibrationAlternative Rules
112 Application 113 Approval 114 Application of approved alternative rule 115 Notice to apply replaced rule 116 Refusal — false, misleading or incomplete information 117 Revocation by Minister 118 Revocation under law 119 Rule after notification or revocationReporting, Providing, Recording and Retention of Information
120 Electronic provision 121 Record-making 122 Corrections 123 Notification of testingAmendments to these Regulations
124 [Amendment] 125 [Amendments] 126 [Amendments] 127 [Amendment] 128 [Amendment] 129 [Amendments] 130 [Amendments] 131 [Amendments] 132 [Amendment] 133 [Amendment] 134 [Amendment] 135 [Amendment] 136 [Amendment] 137 [Amendment] 138 [Amendment] 139 [Amendment] 140 [Amendment] 141 [Amendments] 142 [Amendment] 143 [Amendments] 144 [Amendment] 145 [Amendments] 146 [Amendment] 147 [Amendment]Coming into Force
148 Registration