Multi-Sector Air Pollutants Regulations, SOR/2016-151

Section 85

Invalid emissions check — calibration and interference

Cite as Multi-Sector Air Pollutants Regulations, SOR/2016-151, s. 85 · current to January 19, 2026 · regulation last amended January 1, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

If a calibration error check on a cell of an analyzer does not meet the requirements of subsection 83(6) or a determination — based on the readings taken during a sequence of calibration error checks that includes that calibration error check — of the CO interference response made under subsection 84(2), or of the NO interference response made under subsection 84(3), is more than 5%, (a) any emissions check that is conducted with the analyzer, since the most recent sequence of calibration error checks on the analyzer, is invalid; and (b) no emissions check that is conducted with the analyzer is valid until (i) a sequence of calibration error checks on its cells is conducted for which each calibration error check meets the requirements of subsection 83(6), and (ii) a determination — based on the readings taken during that sequence — of at most 5% is made in accordance with subsections 84(2) and 84(3) of the CO interference response and of the NO interference response, respectively.
Read the Multi-Sector Air Pollutants Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.