Multi-Sector Air Pollutants Regulations, SOR/2016-151

Section 80

Using electrochemical analyzer

Cite as Multi-Sector Air Pollutants Regulations, SOR/2016-151, s. 80 · current to January 19, 2026 · regulation last amended January 1, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) An emissions check must be conducted by means of an electrochemical analyzer. (2) The electrochemical analyzer must (a) be capable of simultaneously measuring the concentrations, in an engine’s exhaust gas, of each of the following gases by means of an electrochemical cell for each of those gases: (i) O2, CO and NO, for (A) a rich-burn engine that is equipped with a three-way catalyst, and (B) an engine whose NOx in the exhaust gas consists of at most 10% NO2, based on the results of the most recent performance test conducted on it, and (ii) O2, CO, NO and NO2, in any other case; (b) have a resolution, as specified by its manufacturer, that is at most (i) 1 ppm, for CO, NO and, if applicable, NO2, and (ii) 0.1%, for O2; and (c) be equipped with a device that monitors the temperature of the NO electrochemical cell.
Read the Multi-Sector Air Pollutants Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.