Multi-Sector Air Pollutants Regulations, SOR/2016-151
Section 84
Reading for CO and NO interference responses
Cite as Multi-Sector Air Pollutants Regulations, SOR/2016-151, s. 84 · current to January 19, 2026 · regulation last amended January 1, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) When a reading of an electrochemical cell’s response to a span gas for NO or NO2 is taken under subsection 83(1), a reading must also be taken — for the purpose of determining the CO and NO interference responses — of the response of the following other cells of the analyzer to that span gas:
(a) for a span gas for NO, the CO cell; and
(b) for a span gas for NO2, the CO and NO cells.
(2) The CO interference response — namely, the response of the CO cell to the presence of NO and NO2 in the introduced span gas — is the percentage determined by the formula[(RCO−NO/CNOG × CNOS/CCOS) + (RCO−NO2/CNO2G × CNO2S/CCOS)] × 100whereRCO−NOis the CO response to span gas for NO, expressed in ppm of CO;CNOGis the certified concentration of NO in the span gas for NO, expressed in ppm of NO;CNOSis the concentration of NO in the exhaust gas of the engine, as determined in accordance with section 89 for the most recent emissions check that was conducted by means of the analyzer referred to in subsection (1), expressed in ppm of NO;CCOSis the concentration of CO in the exhaust gas of the engine, as determined in accordance with section 89 for that most recent emissions check, expressed in ppm of CO;RCO−NO2is the CO response to span gas for NO2, expressed in ppm of CO;CNO2Gis the certified concentration of NO2 in the span gas for NO2, expressed in ppm of NO2; andCNO2Sis the concentration of NO2 in the exhaust gas of the engine, as determined in accordance with section 89 for that most recent emissions check, expressed in ppm of NO2.
(3) The NO interference response — namely, the response of the NO cell to the presence of NO2 in the introduced span gas — is the percentage determined by the formulaRNO−NO2/CNO2G × CNO2S/CNOxS × 100whereRNO−NO2is the NO response to span gas for NO2, expressed in ppm of NO;CNO2Gis the certified concentration of NO2 in the span gas for NO2, expressed in ppm of NO2;CNO2Sis the concentration of NO2 in the exhaust gas of the engine, as determined in accordance with section 89 for the most recent emissions check that was conducted by means of the analyzer referred to in subsection (1), expressed in ppm of NO2; andCNOxSis the concentration of NOx in the exhaust gas of the engine, as determined in accordance with section 89 for that most recent emissions check, expressed in ppm of NOx.
(4) If there is no prior emissions check conducted by means of the analyzer referred to in subsection (1),
(a) the value of CNOS, CCOS and CNO2S referred to in subsection (2) or (3) is the certified concentration of NO, CO and NO2, respectively, in the span gas for that gas, expressed in ppm of that gas; and
(b) the value of CNOxS referred to in subsection (3) is the total of the certified concentrations of NO and NO2 in the span gas for NO and NO2, respectively, expressed in ppm of NOx.
(5) The CO interference response and the NO interference response must each be at most 5%.
Read the Multi-Sector Air Pollutants Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.