Multi-Sector Air Pollutants Regulations, SOR/2016-151

Section 82

Analyzer — operation and maintenance

Cite as Multi-Sector Air Pollutants Regulations, SOR/2016-151, s. 82 · current to January 19, 2026 · regulation last amended January 1, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) An electrochemical analyzer must be operated and maintained in accordance with the manufacturer’s specifications, including the specifications on (a) introducing gas into the analyzer at a constant flow rate within the range specified by the manufacturer; and (b) rinsing the analyzer with fresh air for the period recommended by the manufacturer between each introduction of gas into the analyzer. (2) Before a calibration error check or an emissions check is conducted in a given location, (a) the measurement system must be verified to have no leaks; (b) if applicable, the measurement system must be verified to have sufficient scrubbing agent in good working order to conduct the check; (c) after those verifications, the analyzer must be turned on at that location for the longer of (i) 20 minutes, and (ii) the period that is necessary for the temperature of the NO electrochemical cell to be within 2°C of ambient air temperature; and (d) after the end of the applicable period described in paragraph (c), the analyzer must be zeroed at that location by (i) using the zeroing function of the analyzer, or (ii) turning it off and on. (3) The measurement system for the introduction of gas into the analyzer must (a) remove condensation continuously from that gas by means of a chilled condenser or similar device; and (b) be non-reactive with NO2.
Read the Multi-Sector Air Pollutants Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.