Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004
Section 62
Permits
Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 62 · last amended December 31, 2024 · read from BC Laws on November 17, 2026
The text
(1) A person must have an installation permit to install, repair or alter any of the following:
(a) a boiler;
(b) a refrigeration system or part of a refrigeration system.
(2) A person must hold an operating permit for each boiler, pressure vessel or refrigeration system.
(3) If a person holds an operating permit under subsection (2), the permit holder or an employee of the permit holder may perform routine maintenance or minor repairs to that equipment without holding a boiler or refrigeration contractor's licence.
(4) A provincial safety manager may, in a particular case, determine what constitutes routine maintenance or minor repairs for the purpose of subsection (3).
(5) An owner may apply for an installation permit to perform an installation or repair of equipment to which this regulation applies that would otherwise require a licensed contractor to apply for the permit if
(a) the owner submits a written application to a provincial safety manager specifying the work to be done in the plant and the equipment and components to be used, and
(b) the owner provides the name and qualifications of the individual who will perform the work under the permit.
(6) A person who applies for a permit for a refrigeration plant using a Group A1, A2L, A2 or B1 refrigerant and having a capacity of 125 kW or more prime mover nameplate rating, or using a Group A3, B2L, B2 or B3 refrigerant and having a capacity of 25 kW or more prime mover nameplate rating, must submit piping design drawing with the permit application.
(7) An installation permit issued under this regulation is not required to name a field safety representative.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.