Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004

Section 61

General duties of a licensed contractor

Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 61 · last amended December 31, 2024 · read from BC Laws on November 17, 2026

The text

(1) Every licensed contractor must, before the commencement of any work, (a) give notice to a provincial safety manager respecting every construction, installation, repair or alteration of equipment to which the Act applies that the contractor performs, and (b) provide evidence satisfactory to a provincial safety manager that the work to be performed falls within the scope of the contractor's licence. (2) On the completion of work, a licensed contractor must (a) notify a safety officer whether the construction, installation, repair or alteration has been completed in accordance with this regulation, and (b) submit to the owner of the equipment and, on request, a safety officer (i) data reports, as defined in CSA B51 or the National Board Inspection Code ANSI/NB-23, or both, for every installation, repair or alteration of equipment to which this regulation applies, and (ii) a repair or alteration report in the case of a repair or alteration of equipment to which this regulation applies. (3) On completion of work under a permit on a refrigeration plant using a Group A1, A2L, A2 or B1 refrigerant and having a capacity of 125 kW or more prime mover nameplate rating or using a Group A3, B2L, B2 or B3 refrigerant and having a capacity of 25 kW or more prime mover nameplate rating, the licensed contractor must, before testing is done, request an inspection from a safety officer.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.