critical defects of commercial motor vehicles, O. Reg. 512/97

Section 10

Cite as critical defects of commercial motor vehicles, O. Reg. 512/97, s. 10 · current to November 11, 2026 · consolidated from March 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) In this section, “fastener” means a component used to secure a vehicle’s disc wheels or spoke wheel rims to the vehicle and may include a wheel stud, rim clamp stud, inner cap nut, outer cap nut, two-piece flange nut, ball seat nut, flat nut or any combination of them; “loose”, when applied to a fastener, means that there is visually observable space between the fastener and its contact point on the disc wheel or spoke wheel rim or that the fastener can be moved using hand force only; “wheel assembly” means disc wheels, spoke wheels and fasteners on one side of one axle. O. Reg. 512/97, s. 10 (1). (2) A commercial motor vehicle or trailer has a critical defect for the purposes of sections 82.1 and 84 of the Act if one or more of the following defects is present on two or more of its wheel assemblies: 1. A disc wheel or component of it is broken. 2. 50 per cent or more of the stud holes in a stud piloted disc wheel are visibly elongated or 50 per cent or more of the stud holes in a hub piloted disc wheel are visible when the nuts are seated against the disc wheel. 3. A spoke wheel, including a cast wheel, or a component of it, is broken. 4. On a wheel with 10 or more fastener positions, any three fasteners or any two adjacent fasteners are cracked, broken, missing or loose. 5. On a wheel with 9 or fewer fastener positions, any two fasteners are cracked, broken, missing or loose. O. Reg. 512/97, s. 10 (2); O. Reg. 130/10, s. 8.
Read the critical defects of commercial motor vehicles on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.