critical defects of commercial motor vehicles, O. Reg. 512/97

Section 11

Cite as critical defects of commercial motor vehicles, O. Reg. 512/97, s. 11 · current to November 11, 2026 · consolidated from March 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) In this section, “bias ply tire” includes belted bias ply tire; “cord” means the strands of material used to strengthen a tire; “radial ply tire” includes belted radial ply tire; “sidewall” means the portion of a tire between the tread and the bead; “tread” means the portion of a tire designed to come into contact with the road. O. Reg. 512/97, s. 11 (1). (2) A commercial motor vehicle or trailer has a critical defect for the purposes of sections 82.1 and 84 of the Act if one or more of the following defects is present on four or more of its tires: 1. A steering axle tire, i. has no tread remaining across 75 per cent or more of the width of the tire at any location on the tire, or ii. has exposed cord. 2. In a bias ply tire, other than a steering axle tire, i. two or more layers of cord are exposed, or ii. five square inches (32.3 square centimetres) or more of the outermost layer of cords are exposed. 3. In a radial ply tire, other than a steering axle tire, i. two or more layers of cord are exposed in the tread area, or ii. six square inches (38.7 square centimetres) of cord is exposed in the sidewall. 4. A tire, i. is contacting a vehicle component, other than a tire, with the vehicle stopped in the straight ahead position, ii. is void of air pressure or has an air leak that is audible or tangible, or iii. is marked “not for highway use” or “farm use only” or bears the letters “SL”, “NHS”, “K”, “SS”, “AT”, “DH”, “VA” or “TG” as part of the tire designation or on any other location on the tire. O. Reg. 512/97, s. 11 (2); O. Reg. 130/10, s. 9.
Read the critical defects of commercial motor vehicles on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.